#25-SCS
MODEL HDGSRPS
Hydraulic Soil Sampling, Coring and Drilling Machine
All fixtures are secured on a 5’ x 6’ (152 x 183 cm) STEEL base plate designed to mount on a Flat Bed Truck or in a Standard Pick-up Truck. This model is self powered with a 35 HP Briggs & Stratton Vanguard 2 Cylinder Air Cooled Gas Engine equipped with a 12 volt starter and alternator. Complete machine constructed of Steel.
STANDARD FEATURES INCLUDE:
Heavy Duty Rotary Head
Pipe Vise
8’ HD Kelly Bar
4 Way Leveling System
Hydraulic Oil Cooler
Swinging Mast
54” Stroke Mast
20gal Oil Reservoir
5gal Gas Tank
Machine Anchoring System
Reclining Tail Gate Mount
Enclosed Drill Tool Carrier
Gauge & Control Panel
(Machine Only) Weight 2,000 lbs.
****THIS MACHINE FEATURES DIRECT PUSH ONLY -OR- DIRECT PUSH & ROTARY COMBINATION DESIGNED FOR THE USE OF ALL TYPES OF AUGERS, SOIL TUBES, ETC. / UP TO 10” DIA****
EQUIPMENT SPECIFICATIONS
ROTARY HEAD-
0 - 190 RPM (ADJUSTABLE) 1,100 FT LBS TORQUE (13,200 IN LBS)
MASTER CYLINDER:
12,000 LBS DOWN FORCE @ .88 FT PER SECOND
7,500 LBS PULL FORCE @ 1.38 FT PER SECOND
APPROXIMATE CAPABILITIES UNDER NORMAL CONDITIONS
When Using Thin Walled Soil Sampling Tubes
Undisturbed Soil Cores from 1 1/4” – 4 1/2” DIA to Various Depths Depending on Soil Conditions / Usually until a Bedrock Layer is Reached
When Using Continuous Type Augers
4” TO 60 FT / 6” TO 50 FT / 8” TO 30 FT / 10” TO 20 FT
MACHINE PRICING
$ 43,437.00
(NOT INCLUDING VEHICLE)
MACHINE OPTIONS
-
#MO-100 66” Stroke Mast......................................... $ 350.52
-
#MO-102 78” Stroke Mast......................................... $ 701.04
-
#MO-104 Hydraulic Rotary Tube Cleaning Brush.... $ 990.44
-
#MO-108 Rear Hydraulic Stabilizer Jacks.............. $ 3,116.38
-
#MO-112 Rotary Head/Cathead Attachment......... $ 3,125.93
-
#MO-114 140lb SPT Drop Hammer (ASTM SPEC) $ 1,544.10
-
#MO-115 Drop Hammer Carrier................................ $ 284.39
-
#MO-116 Adapter Pin Tool/Hammer ........................... $ 43.52
-
#MO-118 Vise Grip Chain Wrench .............................. $ 71.26
-
#MO-120 Hand Tool Kit.............................................. $ 722.06
-
#MO-124 Deck Mount Auger Rack ............................ $ 995.76
-
#MO-150 Side Feed Water Swivel / AW..................... $ 958.40
-
#MO-151 Side Feed Water Swivel / AWJ................... $ 986.74
-
#MO-152 Low Pressure Water Pump System......... $ 2,410.40
-
#MO-153 High Pressure Water Washing System... $ 2,953.49
-
#MO-154 25gal Water Tank...................................... $ 1040.60
-
#MO-155 50gal Water Tank................................... $ 1,544.99
-
#MO-156 75gal Water Tank................................... $ 2,049.40
(Water Tanks Are Steel w/ Epoxy Interior Coating)
-
#MO-158 35ft Low Pressure Retractable Hose Reel $ 538.28
-
#MO-159 35ft High Pressure Retractable Hose Reel $ 838.54
-
#MO-160 Hydraulic Tool Pulling Winch................. $ 6,868.59
-
#MO-186 Master Cylinder Speed Control ................. $ 564.51
-
#MO-188 2spd Rotary Head – HSLT/ LSHT......... $ 3,531.99
-
#MO-190 Automatic Machine Anchoring System .. $ 9,786.06
****ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE****
No online ordering available.
All orders must be placed via email or by phone.
970-674-0259 / 800-611-0404 (Toll Free)
